DVE10-LITE - Rugged 10.4" Driver's Vision Enhancer for Military Vehicle Applications

Technical Specifications
Display	10.4" TFT AM, SVGA, LCD, 16M Colors
Sunlight Readable*	1,100 nits Standard LED backlight
Contrast Ratio	1000:1
Dimming Ratio	1000:1
Viewing Angle (typical)	160° (H) x 160° (V)
Video Input	NTSC/PAL (B, D, G, I, K)
Mounting	Standard A-kit
Power Conditioning	Internal Short Circuit Protection Load Dump Protection Over Voltage Protection Reverse Polarity Protection
Power Consumption	20 Watts Max
Environmental Specifications
IP Rating	IP67 (NEMA 6 Submersible)
Operating Temperature	-30°C to 70°C (-22°F to 158°F)
Storage Temperature	-30°C to 80°C (-22°F to 176°F)
Humidity	0-100%
Altitude	45,000 ft.
Military Specifications (MIL-STD)
MIL-STD-461E	EMI
MIL-STD-810F	Method 501.4 II-Op; High Temperature
MIL-STD-810F	Method 502.4 II-Op; Low Temperature
MIL-STD-810F	Method 514.5; Procedure I,Vibration
MIL-STD-810F	Method 516.5; Procedure I, Shock
MIL-STD-1275D	Wide Range DC Power Input 8-36 VDC (12, 24, 28 VDC nominal)
MIL-STD-3009*	NVIS Compliant (Optional)
MIL-PRF-22885G	Sunlight Readability for Buttons
MIL-PRF-22750F	Housing Milled Aluminum, Black Finish
MIL-DTL-38999	Connector (Qualified)

* DSE’s integrated NVIS options either produce near zero color shift or slight color shift for full sunlight readability.
The integrated NVIS is MIL-STD-3009 compliant, and can
be viewed with NVGs (Night Vision Goggles) through the entire brightness range. Dimming is not necessary to meet
MIL-STD-3009, Class B NVIS requirements.
Brightness levels will be reduced with the NVIS option.

Please note cables are not included.

Dimensions	MIL	INCHES
Height	229 mm	9.00"
Width	267 mm	10.50"
Depth (Main Case)	28 mm	1.70"
Depth (with connectors)	58 mm	2.30"
Weight	4.90 lbs ± .25 lbs

MIL-DTL-38999 Series I Sensor Connector
PIN	SIGNAL	PIN	SIGNAL
1	N/C	12	RS170_IN_2
2	N/C	13	RS170_IN_GND_2
3	N/C	14	N/C
4	N/C	15	N/C
5	N/C	16	N/C
6	N/C	17	N/C
7	RS170_IN_3	18	RS170_IN_1
8	RS170_IN_3 GND	19	RS170_IN_GND_1
9	N/C	20	N/C
10	N/C	21	N/C
11	N/C	22	N/C

MIL-DTL-26482 Series I 3 Pin Power Connector
PIN	SIGNAL
A	28 VOLT DC
B	28 VOLT RTN
C	NO CONNECTION

DSE is an ISO9001:2008/AS9100B Registered Company	16100 N. Greenway-Hayden Loop \| Suite 850 Scottsdale, AZ 85260	TEL: 1.480.515.1110 FAX: 1.480.515.0144 E-mail: info@digitalsys.com

BACK TO TOP

Download Printable PDF


Driver's Vision Enhancer 10.4" TFT LCD Display Composite Video Input	DVE10-LITE
(1) Auto Sensing NTSC/PAL (1) Composite Video Input 10.4" TFT AM LCD SVGA (800 x 600) LED Backlight (1000:1 Dimming Ratio) Transflective Enhancement Antireflective/Antiglare Surface Treatments Milled AL Case, sealed to IP67 / NEMA 6 Military Grade Sealed Connector Mounts in Standard A-Kits Wide Range Input (8-36 VDC) Protected against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity 20 Watts Maximum Power Consumption
		DSE’s Driver Vision Enhancer Display (DVE10-LITE) is a ruggedized 10.4" military LCD display, designed to operate under the most extreme environments found in off-road and tracked vehicles. The ruggedized situational awareness monitor is capable of operating in environments with extended temperature options, extreme shock and vibration, explosive atmosphere, daylight and night-time conditions. Housed in a milled billet aluminum case, the DVE10-LITE is light weight and watertight, with a fully sealed, military-grade connector. Front mounted controls and various mounting options makes the monitor user-friendly. The rugged DVE10-LITE display is MIL-STD-3009, and fully sunlight readable, making it viewable under any lighting conditions.
10.4" TFT AM LCD XGA (1024 x 768) Night Vision Goggle Filter (MIL-STD-3009)