PSM-CAN

PSM-CAN

Programmable Surveillance Monitor with CANBus Series

The Programmable Surveillance Monitor (PSM-CAN) is a series of MIL SPEC displays with integrated Digital Video Recorder (DVR), capable of real-time recording and playback. The full-frame rate video, with H.264/MPEG-4 compression and embedded time stamping up to 1/100th of a second, is downloadable via USB port. This highly ruggedized display offers ASCII or HEX code (via CANBus or RS-422) protocol for control of external systems and/or internal display features. Multiple mounting options allow for seamless integration within any rugged system.

Request a Quote  Click Here

Standard Features

  • (2) RS170 Inputs;
  • (1) RS170 Output
  • (20) Tactile Programmable Buttons
    • Internal and/ or External Use
  • CANBus or RS-422 Communication
  • (1) USB Connector Download Port
  • PIP/POP Screen Viewing Capable
  • SVGA Resolution (800×600)
  • Auto Sensing NTSC/PAL
  • MIL-C Connectors*
  • LED Backlight (Extreme 3000:1 Dimming Ratio)
  • Anti-Reflective and Anti-Glare Treatments
  • Enhanced Sunlight Readability
  • IP67/NEMA 6 Enclosure
  • 8.4”, 10.4”, 12.1” and 15.0”  Sizes Available

DVR Features

  • 32GB, with up to 32 Hours Record Time (approx. 1hr/GB)
  • Records 24-bit High Frame-rate Video (30 fps)
  • H.264/MPEG-4 Data Compression
  • USB Download Port (appears as a remote Media Drive when connected to a PC)
  • Time Stamping (1/100th of a Second)
  • Onscreen Playback; Image Snapshot
  • Video Thumbnail View File Management
  • FF, RW, Pause, Play, Record, Stop Bezel Buttons
  • Secure Erase
  • Recording in Picture Over Picture (POP) Mode is not Available

Programmable Button interface Features

  • Integrated Button Assignment/Naming Capability

Optional Features

  • 64GB or 128GB Storage
  • Monochrome Green/Red Night Modes
  • NVIS MIL-STD-3009 Compatibility

Optional Features
optional

*(Quoted individually).

LCD SizeResolutionNitsViewing AngleContrast
Ratio
Maximum PowerConsumption
8.4” TFT AM LCDSVGA (800×600)800160° (H) x 160° (V)900:1≤30 Watts
10.4” TFT AM LCDSVGA (800×600)800160° (H) x 160° (V)900:1≤40 Watts
12.1” TFT AM LCDSVGA (800×600)550160° (H) x 140° (V)600:1≤40 Watts
15.0” TFT AM LCDXGA (1024×768)800160° (H) x 140° (V)800:1≤40 Watts
Digital Video Recorder (DVR) Specifications
Maximum Recording CapacityApproximately 1hr/GB. Up to 32 hours (32GB); Up to 64 hours (64GB); Up to 128 hours (128 GB)
Video CompressionH.264/MPEG-4
Time Stamping1/100th of a second
USB Download PortAppears as a remote HDD when connected to a PC
Technical Specifications
Display8-bit color, 16,777,216 colors
Dimming Ratio3000:1 (Engineering) TBD
Video Inputs(2) RS-170; NTSC or PAL (B, D, G, I, K)
Video Outputs(1) RS-170
Connectors*MIL-C Connectors
HousingMilled Aluminum, Black Hard Anodized
MountingPanel, RAM, 75mm VESA Mount, Side Mount, Corner Mounting Tabs
Wide Range DC Power Input10-36 VDC (12,24,28 VDC nominal)
Power ConditioningProtected against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity
Environmental Specifications
IP RatingIP67 (NEMA 6 Submersible)
Operating Temperature-40°C to 71°C (-40°F to 160°F)
Storage Temperature-51°C to 71°C (-60°F to 160°F)
Humidity0-100%
Altitude45,000 ft.
Military Specifications
MIL-STD-461EMIMIL-STD-810Method 512, Immersion
MIL-STD-704Aircraft Power RequirementsMIL-STD-810Method 513, Acceleration
MIL-STD-810Method 500, AltitudeMIL-STD-810Method 514, Procedure I, II, V, VI; General Vibration
Category 14 – Aircraft; Category 20 – Ground Mobile
MIL-STD-810Method 501, High TemperatureMIL-STD-810Method 516, Procedure I, Functional Shock
MIL-STD-810Method 502, Low TemperatureMIL-STD-810Method 520, Temp, Humidity, Vibe and Altitude
MIL-STD-810Method 503, Temperature ShockMIL-STD-1275Vehicle Power Requirements
MIL-STD-810Method 505, Solar RadiationMIL-STD-1472Thermal Contact Hazard
MIL-STD-810Method 506, RainMIL-STD-3009NVIS Compatibility (Optional)
MIL-STD-810Method 507, HumidityMIL-PRF-22885Sunlight Readability for Push Buttons
MIL-STD-810Method 508, FungusMIL-A-8625Standard Finish, Type III, Class 1 & 2
MIL-STD-810Method 509, Salt/FogMIL-PRF-22750Painted Finish, Optional, Minimum Quantity Required
MIL-STD-810Method 510, Blowing Sand and DustMIL-DTL-26482(and 38999) Connector, Qualified
MIL-STD-810Method 511, Explosive Atmosphere

*Cables not included

†Power range specified covers momentary environmental fluctuations generally found in a mobile environment while display is operating. For power initialization and continual operation, nominal voltages are required

Product Download Information
pdf-iconDatasheet
Overview Drawings
pdf-iconUser Manual
pdf-iconPSM-CAN08V
pdf-iconPSM-CAN10V
pdf-iconPSM-CAN12V
pdf-iconPSM-CAN15V

Specific mount diagrams available upon request, contact DSE for more information.

READY TO ORDER?

Request a quote and someone from our sales team will be in touch.

Kasim AslamPSM-CAN