Drivers Vision Enhancers | DVE10
Driver’s Vision Enhancers (DVE)
Greatly improving situational awareness and safety during mission-critical vehicle operations, DSE’s family of rugged DVE’s give drivers and crew members a tactical advantage on the battlefield. All DSE DVE displays are backwards compatible with legacy DVE system installations.
Vehicle Platform Examples
Providing clear and precise thermal imagery, the DVE10 can display mission-critical information under severe weather conditions (fog, sand, dust or smoke) and is backwards compatible with legacy DVE system configurations (cables, sensors and mounting), allowing for easy integration into current system installations.
- (1) Sensor Input (RS-170)
- (1) Composite AUX Video Input
- (1) Pass-through Video Sensor Output (RS-170)
- (2) RS422 Serial Data Interface
- SVGA Resolution (800 x 600)
- MIL-C Connectors*
- LED Backlight (3000:1 Dimming Ratio)
- Anti-Reflective and Anti-Glare Treatments
- Enhanced Sunlight Readability
- 10.4″ TFT AM LCD (excluding DVE08 model)
- Mounts in Standard A-Kits
* -*Please note cables not included.
|Display||10.4” TFT AM LCD, SVGA (800×600), 16,777,216 Colors|
|Viewing Angle||160° (H) x 160° (V)|
|Video Inputs||(2) RS-170|
|Housing||Milled AL, Black Hard Anodized|
|Mounting||Standard A-kit; backwards compatible with|
legacy DVE installations
DC Power Input†
|10-36 VDC (12,24,28 VDC nominal)|
|Power Conditioning||Protected against Internal Short Circuit, Load Dump,|
Over Voltage and Reverse Polarity
|Power Consumption||30 Watts Maximum|
|IP Rating||IP67 (NEMA 6 Submersible)|
|Operating Temperature||-40°C to 70°C (-40°F to 158°F)|
|Storage Temperature||-50°C to 80°C (-58°F to 176°F)|
|MIL-STD-810||Method 501.4 II-Op; High Temperature|
|MIL-STD-810||Method 502.4 II-Op; Low Temperature|
|MIL-STD-810||Method 514.5; Procedure I, General Vibration|
|MIL-STD-810||Method 516.5; Procedure I, Functional Shock|
|MIL-STD-1275D†||Vehicle Power Requirements|
|MIL-A-8625 Type III (Class 1 & 2)||Standard Finish|
|MIL-PRF-22750F||Optional Painted Finish – Min. Qty Required|
* Please note cables not included.
† The power range specified covers momentary environmental fluctuations generally found in a mobile environment while display is operating. For power initialization and continual operation, nominal voltages are required.
NOTE: CONTINUOUS PRODUCT DEVELOPMENT MAY NECESSITATE SPECIFICATION AND DESIGN CHANGES WITHOUT NOTICE